{
  "id": "stainless-and-silicone-shower-hair-catcher",
  "sku": "stainless-and-silicone-shower-hair-catcher",
  "title": "Stainless Steel and Silicone Shower Hair Catcher",
  "slug": "stainless-and-silicone-shower-hair-catcher",
  "price": 46.99,
  "currency": "SGD",
  "availability": "in_stock",
  "category": "shower-drain-hair-catchers",
  "category_label": "Shower & Bath Hair Catchers",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "0.05 kg",
  "images": [
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/main-stainless-and-silicone-shower-hair-catcher.jpg",
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-2.jpg",
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-3.jpg",
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-4.jpg",
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-5.jpg",
    "https://drains.asia/dropship-images/shower-drain-hair-catchers/stainless-and-silicone-shower-hair-catcher/stainless-and-silicone-shower-hair-catcher-6.jpg"
  ],
  "description_short": "A rust resistant stainless steel plate with elliptical drainage slots, a raised centre dome and a soft silicone rim that hugs the floor to trap hair before it reaches the pipe.",
  "description": "The problem nobody deals with until it is too late\n\nShower drains do not block overnight. They block slowly, over months, while everyone in the house carries on as normal. A few strands of hair go down with each wash. They catch on a rough edge in the pipe. Soap, conditioner and skin oils stick to those strands. The whole thing thickens into a soft grey plug that holds water back.\n\nBy the time you notice, the water is already pooling. You are standing in two inches of soapy water waiting for it to clear. Then comes the bottle of caustic drain cleaner, or the bent coat hanger, or the call to a plumber who charges a call-out fee to pull out something you could have binned months ago.\n\nA shower hair catcher is the cheapest piece of plumbing maintenance you will ever buy. It does not fix an existing blockage, but it stops the next one from forming, and it does that every single day without you thinking about it.\n\nHow a flat drain strainer works\n\nThe idea is simple. You put a barrier between the water and the pipe, with holes big enough for water and too small for hair.\n\nThe trick is in how those holes are shaped. Round holes clog quickly, because hair wraps around the edges and closes them one by one. Elliptical slots work better. They are long enough that a single strand lies across rather than slipping through, and the extra length gives water far more open area to pass through than a grid of small circles would.\n\nThis catcher adds a second feature on top of that. A raised half-dome sits in the middle of the plate. When hair starts to collect, it tends to gather around the outer ring first. The centre dome keeps a clear path open, so even a partly loaded strainer keeps draining at a reasonable rate. You get a warning before you get a problem.\n\nThe last piece is the silicone rim around the outside. Metal on tile leaves a tiny gap, and small debris finds that gap. Soft silicone flexes against the floor, closing the gap and adding a bit of grip so the plate does not skate around underfoot. It is a small detail that makes the difference between a strainer that catches most things and one that catches nearly everything.\n\nWho this suits\n\nAnyone with long hair in the house. That is the obvious one. Long hair is the main culprit in blocked shower drains, and a household with two or three long-haired people can clog a pipe in a season.\n\nPet owners come next. Washing a dog in the shower sends an extraordinary amount of fur down the drain in one go. Short fur is actually harder to catch than long hair, which is where the sealed silicone edge earns its place.\n\nRenters benefit too. There is nothing to install, nothing to stick down and nothing to explain to a landlord. It sits on the floor, it does its job, and it comes with you when you move.\n\nAnd then there are people who have already had a blocked drain and never want it again. Once you have paid for a drain clearance, a strainer looks like very good value.\n\nHow to choose the right one\n\nStart with a tape measure. This is the step people skip and it is the one that matters most. This plate is 12.1 cm wide, and it needs to rest on the shower floor around the drain opening. That means your drain opening must be comfortably smaller than 12.1 cm. If your drain is wider, no amount of hoping will make a 12.1 cm plate sit over it.\n\nNext, think about height. This one is about 1 cm high, which is low enough to step on without noticing. Tall dome strainers catch more hair in theory, but they get knocked, kicked and stood on, and in a small shower they become something you keep bumping into. Low and flat tends to win in real life.\n\nThen look at the material. Plastic strainers are cheap and they work, for a while. Hot water and shampoo take their toll, and they warp, discolour and go brittle. Stainless steel stays stainless. Paired with a silicone edge, you get the strength of metal and the soft seal of rubber in one piece.\n\nFinally, think about how it cleans. If a strainer has a basket to unclip, a mesh to pick apart or suction cups to prise off, you will clean it less often. The best shower drain hair trap is the one you actually empty. A single flat plate that lifts straight out means the job takes ten seconds and you have no excuse.\n\nLiving with it\n\nHere is the honest routine. After a shower, glance down. If you see hair, pick the plate up, wipe or tip the hair into the bin, rinse the plate under the tap and set it back. Done.\n\nEvery week or two, give it a proper clean. Warm water, a drop of dish soap and a soft brush or old toothbrush through the slots to clear any soap film. Avoid steel wool and gritty scouring pads, because they will scratch the stainless finish and give soap scum something to hold onto. Dry the silicone rim before you set it back down so it lies flat.\n\nIt is worth pairing this with one other habit. Once a month, run very hot water down the drain for a minute. The catcher keeps the solids out, and the hot flush helps move the dissolved soap residue that coats the inside of the pipe. The two together will keep most shower drains running clear indefinitely.\n\nIf you do hit a slow drain despite the strainer, lift the catcher out before using any chemical cleaner. You want the product going down the pipe, not sitting in a tray on top of a plate.\n\nA few things it will not do\n\nIt is worth being straight about limits. This is a strainer, not a seal, so it will not stop drain odours. Smells usually come from a dried-out trap or decay further down the line, and the fix is water in the trap or a proper clean of the pipe.\n\nIt will not clear an existing blockage either. If your drain is already slow, deal with that first, then fit the strainer to keep it clear.\n\nAnd it is a round plate for a round drain. A long channel or linear drain needs a different shape entirely.\n\nThe short version\n\nHair blocks shower drains, and the cheapest fix is a barrier that catches it where you can see it. This stainless steel plate with a silicone rim sits flat over a standard round drain, uses elliptical slots and a raised centre dome to keep water flowing, and lifts out in one piece for cleaning.\n\nMeasure your drain opening first and make sure it is smaller than 12.1 cm. Give the plate a quick wipe every few showers. In return, you get a shower that drains the way it did when it was new, and you never have to think about it again.",
  "llm_summary": "It measures 12.1 cm wide by 1 cm high and weighs about 0.1 lb (roughly 0.05 kg). The body is rust resistant stainless steel with a silver stainless finish and a modern style. Elliptical drainage slots catch hair while allowing water through, a raised half-dome centre section helps maintain flow, and a soft silicone edge sits against the floor to block smaller debris. One unit is supplied. Colour is listed as silver; country of origin and detailed material percentages are not specified by the maker. Cleaning is by lifting, emptying and rinsing.",
  "returnable": true,
  "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; your protection under the Consumer Protection (Fair Trading) Act 2003 for faulty goods is unaffected. Return postage on faulty goods is ours.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Drains Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://drains.asia/stainless-and-silicone-shower-hair-catcher/",
  "canonical_url": "https://drains.asia/stainless-and-silicone-shower-hair-catcher/",
  "json_url": "https://drains.asia/api/products/stainless-and-silicone-shower-hair-catcher.json",
  "updated_at": "2026-10-12"
}
