{ "id": "self-adhesive-hair-strainer-roll-10m", "sku": "self-adhesive-hair-strainer-roll-10m", "title": "Self Adhesive Hair Strainer Roll 10m", "slug": "self-adhesive-hair-strainer-roll-10m", "price": 52.99, "currency": "SGD", "availability": "in_stock", "category": "shower-drain-hair-catchers", "category_label": "Shower & Bath Hair Catchers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/main-self-adhesive-hair-strainer-roll-10m.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-2.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-3.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-4.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-5.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-6.jpg", "https://drains.asia/dropship-images/shower-drain-hair-catchers/self-adhesive-hair-strainer-roll-10m/self-adhesive-hair-strainer-roll-10m-7.jpg" ], "description_short": "A 100mm wide mesh roll you cut to size, press over round, square or odd-shaped drains, and replace whenever it fills with hair, lint and food scraps.", "description": "The slow drain nobody deals with until it is too late\n\nMost blocked drains do not happen overnight. They build. A few strands of hair go down with the shower water, catch on the lip of the trap, and stay there. The next lot catches on those. Soap, skin and grease stick to the tangle. Weeks later the water starts pooling around your feet in the shower, and a month after that it is sitting there long after you have turned the tap off.\n\nBy then the fix is unpleasant. You are either pouring caustic chemicals down a pipe you cannot see into, feeding a drain snake through a trap, or calling someone who charges a call-out fee to pull out a lump of wet hair.\n\nThe sensible move is to stop the hair before it ever gets into the pipe. That is the entire job of a shower drain sticker roll. It is not clever technology, and it does not need to be. It is a piece of mesh that sits between your hair and your plumbing.\n\nWhat the 10 metre roll actually is\n\nThis is a continuous strip of filter mesh, 100mm wide, with an adhesive border on the back. It comes as a 10 metre roll with a small applicator tool to press the mesh flat.\n\nYou do not get pre-cut circles sized for one standard drain. You get raw length, and you cut what you need. That sounds like more effort, but it is the reason it works across so many situations. A pre-cut circle fits one drain. A roll fits every drain in your house.\n\nMaterial, colour, weight and country of origin are not specified in the information we have, and we would rather tell you that than guess.\n\nHow it works in practice\n\nWater goes through the mesh. Hair does not. That is the whole mechanism.\n\nThe mesh holes are fine enough to stop strands of hair, tissue, thread, cotton fibres and food scraps, but open enough that normal shower or sink flow passes without backing up. When the surface gets loaded with hair, flow slows down, and that slowdown is your reminder to change it. It is a simple feedback loop, which is better than a hidden basket you forget about for three months.\n\nKeeping that material out of the trap has a second benefit. The smell that comes from a bathroom or kitchen drain is usually decomposing organic matter sitting in the standing water of the trap. Less material down there means less for bacteria to work on.\n\nWho gets the most out of it\n\nHouseholds with long hair are the obvious case. One person with hair past their shoulders can shed enough in a week to visibly coat a mesh piece.\n\nShared houses and student accommodation are next. Multiple users, nobody wants to be the one cleaning the drain, and the landlord is not going to be thrilled about repeat blockages. Sticking a fresh piece down is a job anyone will actually do, which is more than can be said for pulling apart a trap.\n\nPet owners who wash dogs at home will find fur goes down faster and mats worse than human hair. Older plumbing benefits too, because pipes with scale or rough interiors grab hair more readily than smooth modern ones. And anyone renting likes that nothing is drilled or permanently attached.\n\nSalons, barbers and pet groomers are a heavier-duty case. The mesh will fill fast in those settings, but at seconds per change and roughly 60 to 100 pieces per roll, it is still cheaper than the alternative.\n\nChoosing the right piece size\n\nMeasure straight across the widest part of your drain opening. Then add at least 20mm on each side so the adhesive border has clean, flat surface to grip. That margin matters more than people expect. Mesh stuck right at the edge of the hole will lift as soon as water pushes at it.\n\nFor a round shower waste, a square piece is fine. There is no need to cut a perfect circle. The corners simply sit on the floor and nobody sees them once it is in.\n\nFor a long channel or linear drain, cut a single strip to the full length rather than overlapping several short pieces. Overlaps create ridges that catch water and lift.\n\nFor a kitchen sink, check whether your sink has a raised strainer basket. If it does, the mesh is better placed under or around it rather than over a curved lip where the adhesive cannot make full contact.\n\nGetting it to stick, first time\n\nNine out of ten sticking failures come down to one thing. The surface was not properly dry.\n\nWipe away soap scum, hair and grime with a cloth. Dry it with a towel. If you can, go over it once with a little rubbing alcohol and let it air for a minute. Soap film is slippery and invisible, and adhesive will not bite through it.\n\nThen peel the backing, lower the mesh over the opening, and press outward from the centre so you are not trapping air pockets under the border. The included tool makes this part tidier than using a thumb. Give it a minute before you run water over it.\n\nAvoid applying to cracked grout, flaking paint or chipped enamel. Adhesive on loose material will pull that material up when you remove the piece.\n\nChanging it and keeping things clean\n\nWhen a piece looks furry or the water starts to pool, it is time. Do not wait for a full blockage.\n\nThe neat way to remove it is to lift one corner and roll the piece in on itself, so the hair ends up wrapped inside. The whole thing goes in the bin as one bundle. No rinsing, no transferring wet hair from one place to another, no touching it with bare fingers if you would rather not.\n\nWipe the area, let it dry, stick down the next piece. The entire job takes under a minute.\n\nKeep the roll somewhere dry. A vanity drawer or a cupboard is ideal. Steam sitting on the roll day after day will slowly take the edge off the adhesive, which is a small thing but worth avoiding.\n\nOne safety note from the manufacturer worth repeating. It is not suitable for children under three because of choking risk, should be used with adult supervision, and the roll should be kept away from small children.\n\nWhere it fits against other options\n\nMetal drain cages and silicone hair traps are reusable and have their place, but they all share the same drawback. You have to physically clean a hair-covered object with your hands, usually over a sink. People put that off, and a hair trap that nobody empties is just a slow drain with extra steps.\n\nChemical drain cleaners deal with a clog that has already formed. They are harsh on older pipes, unpleasant to store, and they do nothing to stop the next one.\n\nA disposable mesh hair catcher sits at the preventative end. It costs a small amount per change, it takes the unpleasant part out of the job entirely, and because changing it is easy, it actually gets done.\n\nThe short version\n\nHair causes most household drain blockages, and the cheapest time to deal with it is before it enters the pipe. This 10 metre roll of adhesive mesh lets you cut a filter to fit any drain in the house, press it down in seconds and bin it when it fills.\n\nMeasure your drain, add a margin for the adhesive, make sure the surface is bone dry before you stick, and change the piece when you see hair building up. Do that and the trap under your shower stays clear, the smell stays away, and the drain snake stays in the cupboard.", "llm_summary": "Users cut a length of mesh to suit their drain, peel the adhesive backing and press it over the opening, so it fits round, square and irregular drains in showers, bathtubs, kitchen sinks, balconies and floor gullies. The mesh allows water through while trapping hair, tissue, fabric fibres and food scraps to reduce blockages and odour. Finish is listed as matte. Colour, material, weight, product dimensions and country of origin are not specified by the maker. Each pack contains one roll.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; your protection under the Consumer Protection (Fair Trading) Act 2003 for faulty goods is unaffected. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Drains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.asia/self-adhesive-hair-strainer-roll-10m/", "canonical_url": "https://drains.asia/self-adhesive-hair-strainer-roll-10m/", "json_url": "https://drains.asia/api/products/self-adhesive-hair-strainer-roll-10m.json", "updated_at": "2026-10-12" }