{
  "id": "pop-up-sink-plug-with-strainer",
  "sku": "pop-up-sink-plug-with-strainer",
  "title": "Pop Up Sink Plug with Strainer Basket",
  "slug": "pop-up-sink-plug-with-strainer",
  "price": 59.99,
  "currency": "SGD",
  "availability": "in_stock",
  "category": "sink-and-bath-plugs",
  "category_label": "Sink & Bath Plugs",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "0.1 kg",
  "images": [
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/main-pop-up-sink-plug-with-strainer.jpg",
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/pop-up-sink-plug-with-strainer-2.jpg",
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/pop-up-sink-plug-with-strainer-3.jpg",
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/pop-up-sink-plug-with-strainer-4.jpg",
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/pop-up-sink-plug-with-strainer-5.jpg",
    "https://drains.asia/dropship-images/sink-and-bath-plugs/pop-up-sink-plug-with-strainer/pop-up-sink-plug-with-strainer-7.jpg"
  ],
  "description_short": "Brass push-to-close core, a removable basket that traps hair and grit, and adjustable rubber rings so one basin plug fits a wide range of drain holes.",
  "description": "The small part that causes the most annoyance\n\nA sink plug is the kind of thing nobody thinks about until it stops working. Then it becomes a daily irritation. The water drains out while you are shaving. The chain snaps off and the rubber disc disappears behind the cistern. The click stopper that came with the basin sticks half open, so the basin holds water for about forty seconds and then empties itself.\n\nUnderneath that, there is a second problem. Hair goes down the drain. So does soap, toothpaste, shaving foam and whatever came off the dishes. It collects in the trap, mats together and slowly chokes the pipe. By the time the basin is visibly slow, there is already a solid plug of gunk sitting in the bend.\n\nA pop up sink plug with strainer solves both at once. It seals properly when you press it, and it filters what goes down when it is open. The combination is why these have largely replaced chain plugs in modern bathrooms.\n\nHow the push mechanism works\n\nInside the body is a spring loaded core, usually called a bounce core. Press the cap down and the spring locks it in the closed position, pushing a rubber face against the seat so water cannot pass. Press it again and the lock releases, the spring pushes the cap back up, and the basin drains.\n\nThere are no moving parts outside the plug. No rod running down behind the tap, no lever, no linkage under the basin to adjust when it goes out of alignment. That matters because the lever-and-rod style pop up waste is the single most common thing to fail in a bathroom basin. It drifts out of adjustment, the plastic clip snaps, and suddenly the stopper will not lift fully.\n\nA press-type plug avoids all of that by keeping the mechanism self contained. If it ever wears out, you pull it out and drop in another one.\n\nThe strainer is the part that earns its keep\n\nThe basket sits inside the plug body, beneath the cap. When the plug is open, water flows down through it. Hair, grit and food particles stay in the basket.\n\nThat changes how you deal with blockages. Instead of waiting until the basin backs up and then reaching for chemicals or a plunger, you lift the basket out, tip it in the bin and rinse it under the tap. Ten seconds, once a week.\n\nPeople searching for the best anti clog basin plug are usually trying to avoid one specific experience, standing over a sink of grey water that will not go anywhere. Keeping debris at the top of the drain where you can reach it is the simplest way to never have that happen.\n\nIt is worth being honest about the trade-off. Any strainer slows the flow slightly compared with an open drain, because water has to pass through the basket. When the basket is clean, the difference is minor. When it is full, the basin drains like treacle. The maintenance is small but it is not optional.\n\nGetting the size right\n\nThis is where most plug purchases go wrong. Waste hole sizes vary between basins, between kitchen and bathroom fittings, and between countries. A plug that fits one basin perfectly can sit loose in the next one.\n\nThis plug handles that with rubber rings fitted around the body. The rings build the body out so it grips the inside of the drain. One plug therefore covers a span of sizes rather than one exact measurement, which is the point of a basin plug 25 to 46mm style fitting.\n\nTo measure yours, take the old plug out and lay a ruler flat across the metal waste opening. Measure the inside of the hole, not the outer rim or flange that sits on the basin surface. Note it in millimetres.\n\nIf your measurement lands comfortably inside the supported range, you are fine. If it lands right at the edge, order it but test it carefully before you throw the old plug away. A plug that is slightly undersized will lift when water rushes past. A plug that is slightly oversized will not seat flat and will weep.\n\nWhat the materials tell you\n\nThe product details for this one list brass, with a silver finish, at 0.1 kg. That combination tells you a fair amount.\n\nBrass is used throughout plumbing because it handles constant water contact without corroding the way plain steel does. It also has weight, which matters more than it sounds. A heavier plug sits flat and presses evenly against the seal. Lightweight plastic stoppers tend to tilt, and a tilted plug leaks.\n\nThe weak point in any plug is never the metal, it is the rubber. Seals harden over time, especially if they are regularly exposed to bleach or chemical drain cleaner. If you want a plug to last, keep harsh products away from it. Warm soapy water handles almost everything.\n\nAnyone comparing the best brass sink stopper options will notice price differences that mostly come down to how much actual brass is in the core versus plated plastic. Weight is a decent rough guide.\n\nWho it suits\n\nThis style of plug works well for a few situations.\n\nIf your current stopper is a chain plug, this is a straight upgrade in both looks and function. If your existing click plug has failed and you do not want to pull out the whole waste fitting, this drops into the same hole. If anyone in the house has long hair, the strainer basket is the main reason to buy it rather than a plain plug.\n\nIt is less suitable if your basin uses a rod-and-lever pop up waste where the stopper is physically connected to a linkage behind the tap. That assembly has to come out first, and that is a slightly bigger job.\n\nRenters do well with these. Nothing is cut, drilled or glued. Keep the original plug in a drawer, refit it when you leave, and take the good one with you.\n\nFitting and living with it\n\nFitting is simple. Take out the old stopper. Slide a rubber ring onto the body if the drain is on the wider side. Push the new plug in until it seats. Fill the basin, leave it for a few minutes, and watch the water line.\n\nIf the level drops, the usual causes are a ring that is too small, debris caught under the sealing face, or the plug not being pushed fully home. Lift it, wipe it, step up a ring if needed, and try again.\n\nFor ongoing care, empty the basket regularly, rinse the plug body under the tap, and dry the cap occasionally so soap film does not build up on the finish. Avoid abrasive pads. Skip the drain chemicals. With the basket doing its job, you should not need them.\n\nThe short version\n\nA good press-type plug does two jobs. It seals the basin without a chain or a lever, and it stops hair reaching the pipe. This one uses a brass body with a push-to-close core, a lift-out strainer basket, and rubber rings so it fits a range of drain sizes.\n\nMeasure the inside of your waste hole before ordering, fit it in a minute without tools, and get into the habit of emptying the basket. That is genuinely all there is to it, and it is a far better outcome than another evening spent poking at a blocked trap.",
  "llm_summary": "The SD25-C is a pop up sink plug with a built-in strainer basket, sold as a single item. It uses a push-to-close bounce core, so one press seals the basin and another releases it. The product details list brass as the material, a silver colour, dimensions of 6.2 cm wide by 5.8 cm high, and a weight of 0.1 kg. Rubber rings fit around the body so the plug suits a range of drain hole sizes rather than one fixed diameter, and the inner basket catches hair and debris before it reaches the trap. It is designed to replace an existing basket style stopper without tools. Country of origin and warranty are not specified by the maker.",
  "returnable": true,
  "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; your protection under the Consumer Protection (Fair Trading) Act 2003 for faulty goods is unaffected. Return postage on faulty goods is ours.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Drains Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://drains.asia/pop-up-sink-plug-with-strainer/",
  "canonical_url": "https://drains.asia/pop-up-sink-plug-with-strainer/",
  "json_url": "https://drains.asia/api/products/pop-up-sink-plug-with-strainer.json",
  "updated_at": "2026-10-12"
}
